0.8mm Emerald Green Patent PU Leather for Fashion Accessories
Emerald Patent PU Leather for Accessories. Nominal catalogue thickness 0.8mm; confirm current construction, sample terms and availability before ordering.
Product Overview
0.8mm Emerald Green Patent PU Leather for Fashion Accessories — a B2B synthetic leather option for B2B manufacturing applications. Confirm construction, performance targets and available documents for the selected material.
Specifications: PU Leather.
Custom colors, textures, and thickness available. Contact us to confirm sample feasibility and technical requirements.
Specifications, compliance documents, MOQ and sample terms are confirmed by material and order.
Emerald patent PU leather is listed for accessory development at a nominal 0.8mm thickness. Patent-style identifies the glossy synthetic appearance, not a scratch-resistance or durability result. Compare the actual green shade, reflection and backing with the intended accessory construction.
Emerald Patent PU Leather for Accessories
Make a folded trim and wrapped corner using the proposed adhesive and support. Inspect reflection at bends and seams, then check contact with lining and protective packing. Trial the actual authorized decoration process before approving finished accessory production.
Component Review Before Approval
- Approve green shade and gloss under consistent inspection lighting.
- Check pressure marks and coating changes after sewing, folding and storage.
- Review packing contact and cleaning procedures on the exact glossy surface.
Specification and Evidence Checklist
The table identifies purchasing details to confirm, not a certificate or a laboratory test report. Retain the approved sample and written specification for the order.
| Item | Confirmation required |
|---|---|
| Catalogue material | PU synthetic leather; confirm coating and backing composition for the selected article. |
| Nominal thickness | 0.8mm as listed; confirm measured thickness and tolerance on the current sample. |
| Appearance reference | Emerald green, high-gloss patent-style surface; approve against a physical master. |
| Width and backing | Confirm usable roll width, backing construction and the proposed cutting layout before quotation approval. |
| Performance evidence | Agree methods, exposure conditions and acceptance criteria. Request reports identifying the actual article; no verified numerical test result is stated here. |
| Supply terms | Confirm availability, MOQ by color, sample charges, schedule, packing and freight in the current written quotation. |
Sampling and Quotation
Send a component drawing or reference, target quantity, color master, backing requirement, destination and factory process. First review the current swatch, then make the component described above with the intended adjacent materials. Agree the required tests and review their scope before bulk approval. The written quotation must confirm the selected construction and commercial terms.
Buyer Questions
Does a high-gloss patent appearance establish scratch resistance?
No. Gloss describes appearance rather than resistance to scuffing or indentation. Evaluate the selected coating under agreed handling, rubbing and packing conditions. Approve a representative assembled accessory instead of treating the catalogue finish as a test result.
What should accompany a repeat order?
Identify the approved article, sample reference, color master and written requirements. Confirm whether the construction, destination, process or adjacent materials have changed before assuming that an earlier approval still applies.
Are samples and compliance documents automatically available?
No universal sample or documentation promise applies. Ask CNMaterials to confirm sample format, preparation and shipping terms, and which declarations or reports cover the selected article and target market.
Material Image References
Image references do not replace the current physical approval sample or article-specific documentation.
Related Resources
| Material | PU Leather |
|---|---|
| Weight | Contact for specs |
| Surface Finish | Patent/Glossy |
